White pigmented water-based primer-sealer

Excellent stain blocker Seals tannin, knots and sap streaks Seals cigar, cigarette & nicotine odours Seals severe water stains, fire & smoke damage Seals rust stains, graffiti, crayon, lipstick and grease

DESCRIPTION
B-I-N® Aqua is a high-performance white-pigmented low-odour water-based, synthetic shellac-based knot block primer and sealer that combines fast drying times with unrivalled adhesion and best possible coverage.

RECOMMENDED USE
Priming Interiors - Use as a full-surface primer on wood panels, building boards, doors, frames, PVC, plywood, concrete, glossy paint and varnish and other paintable surfaces. Spot-Priming - B-I-N® Aqua is excellent for exterior spot priming of knots, resin, rust stains etc. B-I-N® Aqua is also ideal for interior spot priming of water stains and puttied surfaces. Note that the primer on spot-primed areas with a porous surface may show through if the topcoat has bad coverage.
This also applies to many ceiling paints and shiny enamels – only use a topcoat with good coverage. Sealing - B-I-N® Aqua penetrates and seals porous surfaces and dries to a smooth finish with excellent hiding properties.
The paint gets better coverage and a more uniform shine, which makes B-I-N® Aqua an excellent primer for enamel. Ideal for wood, newcured plaster, concrete and concrete block, stucco, drywall, joint compound, uncoated wallcovering, and other porous surfaces. Stain & Odour Blocking - B-I-N® Aquawill effectively block stains from water, nicotine, grease, oil, soot, rust, mildew, tannin, crayon and lipstick. B-I-N® Aqua is also an outstanding odour barrier and blocks all kinds of odour, including odour from fire damage, smoke, cigars & cigarettes, mildew, pet urine, odour from fireplaces and heaters.
Fire Damage - Replace severely charred substrates and remove loose soot and other contaminants with dry chemical sponge or duster.
Prime damaged surfaces with B-I-N® Aqua to block smoke stains, water stains, and seal odours. Knots & Sap Streaks - Seal knots and resin with one or two coats of B-I-N® Aqua. If the wood is new, two coats are recommended. Glossy Surfaces - Glossy enamel paint and clear finishes, cabinets, panelling, glass, Formica®,MDF, ceramic tile and metal can be primed without sanding or deglossing.